Наплавлення пресового інструмента для обробки кольорових металів самозахисним порошковим дротом ПП-50Х6В2ГСМФА

Simple item page
dc.contributor.authorБойко, І. О.
dc.contributor.authorПашинський, В. В.
dc.contributor.authorПашинська, О. Г.
dc.contributor.authorПаровішник, М. М.
dc.date.accessioned2025-09-08T10:01:35Z
dc.date.issued2022
dc.description.abstractThe work is devoted to development of the method of restoration of worn press tools from 3Kh3M3F steel for extrusion of non-ferrous alloys by mechanized hardfacing with self-shielded flux-cored wire. The advantages and disadvantages of different classes of hardfacing materials are considered and use of 50Kh6V2GSMFA steel is proposed. In the case of hardfacing with selfshielded flux-cored wire the alloying part of this steel provides a higher hardness at high working temperatures of pressing, due to a complex hardening of the martensite matrix with carbides of tungsten, chromium and other elements, as well as additional hardening by vanadium nitride. It allowed increasing the tool life. Moreover, alloying by chromium at the level of 5.5 – 6.0% improved adhesion to the processed metal. Resistance to thermal erosion and thermal fatigue strength of the deposited layer was increased by selection and optimization of gas-slag-forming components. Industrial trails of hardfaced steel 50Kh6V2GSMFA, first applied for restoration and hardening of the hot pressing matrices from 3Kh3M3F steel, were conducted at LLC “ZCM” (city of Bakhmut). Compared to new unsurfaced matrices, those restored by hardfacing demonstrated 2.4…2.5 times higher durability, while working diameter drawdown after 5 pressing cycles decreased three times. Total cost of matrix restoration by surfacing is 1.5 – 20 times lower than that of a new matrix from 3Kh3M3F steel. 19 Ref., 4 Fig.
dc.identifier.citationБойко І. О., Пашинський В. В., Пашинська О. Г., Паровішник М. М. Наплавлення пресового інструмента для обробки кольорових металів самозахисним порошковим дротом ПП-50Х6В2ГСМФА. Автоматичне зварювання. 2022. №7. С. 37 – 42. DOI:https://doi.org/10.37434/as2022.07.06
dc.identifier.doihttps://doi.org/10.37434/as2022.07.06
dc.identifier.urihttps://dspace.mipolytech.education/handle/mip/2455
dc.language.isouk
dc.publisherВидавничий дім "Патон"
dc.subjectpress tools
dc.subjectwear
dc.subjectresistance to thermal erosion
dc.subjectadhesion resistance
dc.subjecthardfacing
dc.subjectself-shielded flux-cored wire
dc.subjectmedium-chrome steel
dc.subjectdurability
dc.subjectrestoration cost
dc.titleНаплавлення пресового інструмента для обробки кольорових металів самозахисним порошковим дротом ПП-50Х6В2ГСМФА
dc.typeArticle

Files

Original bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
Наплавлення пресового інструмента для обробки кольорових металів самозахисним порошковим дротом ПП (1).pdf
Size:
167.03 KB
Format:
Adobe Portable Document Format
Download

License bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
10.29 KB
Format:
Item-specific license agreed to upon submission
Description:
Download

Collections

Кафедра матеріалознавства, механіки та природничих наук (МАТМЕХ)