Перегляд за Автор "Karnaukh, S. G."

Зараз показуємо 1 - 1 з 1

Development and research of the stamp for cutting of a rolled stock with a differentiated clamp
(2022) Karnaukh, S. G.; Markov, O. E.; Shapoval, A. A.; Zubenko, K. V.; Зубенко, K. В.
The work aims to develop and research a stamp with a differentiated clamp of a rolled stock for cutting by shear. A new stamp design with a differentiated clamp of the rolled stock has been developed. In terms of their technical and economic indicators, these stamps meet or exceed the modern samples of similar punch tools. At the same time, in the process of vertical cutting, a constant position of the rolled stock axis is ensured. The transmission of force to the clamp through the rolled stock is excluded. The stamp design ensures its sufficiently high rigidity and relatively small overall dimensions. Based on the analysis of the mathematical model of a stamp with a differentiated clamp, the effective angles of force transmission to the clamp and the cutting of the rolled stock between the stamp parts have been established. The resulting model was used to optimize the angles of force transfer to the clamp, and the cutting rolled stock, respecting the force from the side of a buffer and the minimum required press force. At the same time, the vertical stroke of the moving parts is reduced, the overall dimensions of the stamp are decreased, and the buffer also has a minimum size. To reduce the required force of the press, it is necessary to reduce the value of a frictional slipping coefficient by using antifriction materials on contact surfaces and ensuring good lubrication conditions. The results of the conducted experiments confirm the adequacy of the mathematical model. The value of the required force on the press slide available from experiments is slightly higher than the values obtained by the developed analytical model. The results of the stamp implementation show that: the stamps are efficient and reliable in exploitation; the quality of the cutoff workpieces corresponds to the quality indicators of the workpieces cut on similar modern equipment.